Copyright (C)SUWA TSUSHIN NETWORK.
All Rights Reserved. TOPへ戻る
スポンサードリンク


No.1002 2016.2.26


iRULU Walknbook W3Mini 8" その2




iRULU Walknbook W3Mini 8" その1 の続きです。


□1.BIOS設定

 Windowsタブレットは、普通のパソコンです。
 パソコンですので、起動時のDELキー押下でBIOS画面に入れます。
 このとき、キーボードはUSBタイプを使用します。

 以下の設定項目があります。
 かなり膨大な項目数です。USBやドライブ、電源系で興味深い項目もありますが、
 誤植が多いので未完成なBIOSである可能性があります。



    Main  タブレットのハードウェア情報
       
      BIOS Information(Read Onlyです)
        BIOS Vendor  BIOSの製造会社名
        Core Version  BIOSコアバージョン
        Compliancy  対応UEFI、PI
        Project Version  BIOSプロジェクトバージョン
        Buid Date and Time  BIOSの製造日
         
      CPU Configuration(Read Onlyです)
        Microcode Patch マイクロコードパッチ
         
      SMBIOS Information(Read Onlyです)
        Serial Number  シリアルナンバー
         
      Memory Information(Read Onlyです)
        Total Memory  メモリ容量
         
      GOP Information(Read Onlyです)
        Intel(R) GOP Driver  Graphic Output Protocol ドライバのバージョン
         
      TXE Information(Read Onlyです)
        Sec RC Version  
        TXE FW Version  Intel(R) Trusted Execution Engine のファームウェアバージョン
         
      System Language  BIOSの言語表示を設定します。通常は[English]を選択します。
      System Date  
        タブレット内部時計の日時を設定します。Windowsでの時計と連動するため、
        通常はWindowsで設定します。


    Advanced
      > CPU Configuration
        Socket 0 CPU Infomation
        CPU Speed
        64-bit
         
        Active Processor Cores
        Limit CPUID MAximum
        Execute Disable Bit
        Hardware Prefetcher
        Adjacent Cache Line Prefetch
        Intel Virtualization Technology
        Power Technology
         
      > PPM Configuration
        EIST
        CPU C state Report
          Enhanced C state
        Max CPU C-state
        SOix
         
      > AMI Graphic Output Protocol Policy
        Intel(R) GOP Driver  Graphic Output Protocol ドライバのバージョン
        Output Select
        Brightnesst Setting
        BIST Enable
         
      > PCI Subsystem Setting
        PCI Bus Driver Version
         
        PCI Latency Timer
        PCI-X Latency Timer
        VGA Palette Snoop
        PERR# Generation
        SERR# Generation
        Above 4G Decoding
        SR-IOV Support
         
        > PCI Express Settings
          ・・・
           
        > PCI Express GEN 2 Settings
          ・・・
           
      > Network Stack Configuration
        Network Stack
        Ipv4 PXE Support
        PXE boot wait time
        Media detect count
         
      > USB Configuration
        USB Devices:  USBポートに接続されているデバイス種別が表示されます
         
        Legacy USB Support
        USB3.0 Support
        XHCI Hand-off
        EHCI Hand-off
        USB Mass Storage Driver Support
         
        USB transfer time-out
        Device reset time-out
        Device power-up delay
         
      > Security Configuration
        TXE
        Ipv4 PXE Support
        TXE Unconfiguration Perform
         
      > Miscellaneous Configuration
        State After G3
        UART Interface Selection
        Enable DBG2 Table
         
      > LPSS & SCC Configuration
        LPSS & SCC Device Mode
         
        eMMC Infomation
        SCC eMMC Support
        eMMC Secure Erace
        eMMC Write Protect
         
        SCC eMMC 4.5 DDR50 Support
        SCC eMMC 4.5 HS200 Support
        SCC SDIO Support
        SCC SD Card Support
        SDR25 Support for SDCard
        DDR50 Support for SDCard
        MIPI HSI Support
         
        LPSS DMA #1 Support
        LPSS DMA #2 Support
        LPSS I2C #1 Support
        LPSS I2C #2 Support
        LPSS I2C #3 Support
        LPSS I2C #4 Support
        LPSS I2C #5 Support
        LPSS I2C #6 Support
        LPSS I2C #7 Support
         
      > System Component
        PMIC Configuration
        PMIC ACPI OBJECT
        Power&Performance(PNP) Setting
        CFIO/GPIO PnP Setting
        Asset SLP_SOIX_N in SOix
         
        Battery Charging Configureation
        Battery Solution
        USB MUX(FSA/SMSC3750) ON
        SAR Sensor
         
      > OS/BOM Configuration
        BOM Seletion Switch
        Pre-OS/BOM Selection
        BOM Select Valid
        BOM Select End
         
        OS/BOM Selection
        Config Mode
         
        MIPI PANEL
        Rear Camera
        Front Camera
        Touch Pannel
        Blue Tooth
        GPS
        Light Sensor
        Gravity Sensor
        Acpi CIND Continuum Function
        Codec Selection
         
        ISP PCI Device Selection
        Dynamic Platform&Thermal Framework
        DPTF
        TPM Configuration
        fTPM
        PAVC
         
      > S5 Charging Configuration
        S5-Charging Driver
        S5 LPM Settings
         
      > Thermal Configuration
        IA_APPS_RUN
        IA_APPS_CAP
        USE IA_APPS_RUN or CAP
        Boot on invalid battery
        BatteryId DBI Base
        BatteryId Analog Base
        VBattery Threshold
        CAP_Freq_Index
         
        Critical Trip Point
        Passive Trip Point
         
        Active Trip Points
         
        DPTF T1 Sensor Participant
        Critical
        Passive
        DPTF Display Board Sensor Participant
        Critical
        Passive
        DPTF SOC Board Sensor Participant
        Critical
        Passive
        DPTF Charger Board Generic Sensor Participant
        Critical
        Passive
        Super Debug
        Current Logical Processor
        Start P-State
        Step size
        Power Control Setting
        Performance Control Setting
        DPPM
        CLPM
        DPTF processor
        T1 Sensor
        Display Board Sensor
        SOC Board Sensor
        Charger Board Sensor
        Ambient Temperature
        Ambient based Trip Point Change
        Allow higher performance on AC/USB
        Charger Participant
        Display Participant
        Power Participant
        Sampling Period Value
         

    Chipset
      > South Bridge
        > Azalia HD Audio
          Audio Configuration
          LPE Audio Support
           
        > USB Configuration
          USB Configuration
          USB OTG Support
          USB VBUS
           
          XHCI Controller
          XHCI Mode
           
          USB2 Link Power Management
           
          USB 2.0(EHCI) Support
          All USB Ports
          UHCI Port 1
          UHCI Port 2
          UHCI Port 3
          UHCI Port 4
           
        BIOS Read/Write Protection
        RPMB Provision
         
      > North Bridge
        > Intel IGD Configuration
          GOP Configuration
          GOP Driver
           
          Intel IGD Configuration
          Integrated Graphics Device
           
          IGD Turbo Enable
          Primary Display
          GFX Boost
          DVMT Pre-Allocated
          DVMT Total Gfx Mem
          Aperture Size
          DOP CG
          GTT Size
          IGD Thermal
          Spread Spectrum clock
           
          ISP Enable/Disable
           
        > IGD - LCD Control
          Force Lid Status
          BIA
          ALS Support
          IGD Flat Panel
          IGD Boot Type
          MIPI DSI
          Pannel Scaling
          GMCH BLC Control
           
          Enabled/Disabled PM Weights
           
        > Graphics Power Management Control
          RC6(Render Standby)
           
        Memory Information
        Total Memory
        Memory Speed
        Memory Slot0
        Memory Confighration
        Memory Scrambler
         

    Security
      Administrator Password
      User Password
      > Secure Boot menu
        System Mode
        Secure Boot
         
        Secure Boot
        Secure Boot Mode
        > Key Management
         
      > Secure Flash update
        Signed BIOS update
        Public Key store
        Signature algorithm
        BIOS flash method
        Flash write-protection
         

    Boot
      Boot Configuration
      Setup Prompt Timeout
      Bootup NumLock State
       
      Quiet Boot
      Fast Boot
       
      Boot Option Priorities
      Boot Option #1
      Boot Option #2
      Boot Option #3
       

    Save & Exit
      Save Changes and Exit
      Discard Changes and Exit
      Save Changes and Reset
      Discard Changes and Reset
       
      Save Options
      Save Changes
      Discard Changes
       
      Restore Defaults
      Save as User Defaults
      Restore User Defaults
       
      Boot Override
      Windows Boot Manager
      UEFI: ・・・
       
      Launch EFI Shell from filesystem device
      > Reset System with ME disable Mode
       







スポンサードリンク

TOPへ戻る


ご利用条件
 Copyright (C)SUWA TSUSHIN NETWORK. All Rights Reserved.